| Author | Haneef, Muhammad Faisal |
| Call Number | AIT Thesis no. ISE-01-35 |
| Subject(s) | Milling-machines--Numerical control
|
| Note | A thesis submitted in partial fulfillment of the requirements for the degree of Master of
Engineering, School of Advanced Technologies |
| Publisher | Asian Institute of Technology |
| Series Statement | Thesis ; no. ISE-01-35 |
| Abstract | This study provides a fast, accurate and in expensive way of off-line automatic verification of
CNC program generated by a post processor and determines the possible collisions that may
occur during the execution of NC program. The study also provides an interactive way of
conecting the enors found in the NC program. A graphical simulation approach is
implemented. The CNC machine is modeled by the solids in AutoCAD 2000. The simulation
is done by transferring the solid model according to the G-code instructions of the NC
program by using the Visual Basic programming language. The collisions are detected by
using the AutoCAD method of"Check Interference" with in the Visual Basic program.
The developed algorithm is specific for the MAHO 600E five axes CNC machine. It has a
capability of converting into a program that can be used for any five axis CNC milling
machine.
|
| Year | 2001 |
| Corresponding Series Added Entry | Asian Institute of Technology. Thesis ; no. ISE-01-35 |
| Type | Thesis |
| School | School of Advanced Technologies (SAT) |
| Department | Department of Industrial Systems Engineering (DISE) |
| Academic Program/FoS | Industrial Systems Engineering (ISE) |
| Chairperson(s) | Bohez, Erik L. J.; |
| Examination Committee(s) | Manukid Parnichkun;Nitin V Afzulpurkar;Haroon, Umer; |
| Scholarship Donor(s) | Deutscher Akademiser Austauschdienst DAAD ; |
| Degree | Thesis (M.Eng.) - Asian Institute of Technology, 2001 |