| Author | Sethi, Siddhant |
| Call Number | AIT Caps. Proj. no.EL-16-05 |
| Subject(s) | Radio frequency identification systems
|
| Note | A capstone project submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Engineering Electronics Engineering, School of Engineering and Technology |
| Publisher | Asian Institute of Technology |
| Series Statement | Caps. Proj. ; no. EL-16-05 |
| Abstract | Radio Frequency Identification (RFID) technologies as the name suggest is used to identify
radio waves. The biggest advantage of RFID lies in the fact that they can transmits information
wirelesly by using radio waves, a type of electromagnetic wave. This property is being
used for tracking devices such as in machine automation, keeping count of animals in farms.
A automatic tollbooth gate prototype is made in this project with the help of a passive RFID
technology. The read range required was 3-5 m and was achieved using YR 8001 RFID
reader module and passive RFID tags. The reader also has an attached antenna which is
linearly polarized. The system is working at ultra high frequency (UHF) spectrum.
The testing of the system was done by talking a bicycle instead of a car. The barrier gate
used was a foam cutout attached to the 5 V servo motor. An assumption was taken that only
one tag would be coming at a time such that the reader will only have to read one tag at a
time. With these limitations the testings were done by taking 1 tag, 2 tags and 3 tags. For 1
tag, only single tag was taken and the testings were done with authorized and unauthorized
card. For the 2 tags test, 2 tags were lined one after the other in a straight line. This test was
done by talking several combinations with authorized and unauthorized tags. Lastly, 3 tags
test which was similar to 2 tags test except that in this 3 tags were taken instead of two. All
the test results came out to be conclusive with the theory. |
| Year | 2016 |
| Corresponding Series Added Entry | Asian Institute of Technology. Caps. Proj. ; no. EL-16-05 |
| Type | Capstone Project |
| School | School of Engineering and Technology (SET) |
| Department | Bachelor Degree |
| Academic Program/FoS | Electronic Engineering (EL) |
| Chairperson(s) | Mongkol Ekpanyapong; |
| Examination Committee(s) | Attaphongse Taparugssanagorn; |
| Degree | Capstone Project (B.Sc.)-Asian Institute of Technology, 2016 |