1 AIT Asian Institute of Technology

Performance of bored piles in Kenny Hill Formation (weathered meta-sedimentary) in Kuala Lumpur, Malaysia

AuthorBalakrishnan, E. G.
Call NumberAIT Thesis no. GT-93-04
Subject(s)Piling (Civil engineering)

NoteA thesis submitted in partial fulfillment of the requirement for the degree of Master of Engineering, School of Engineering and Technology
PublisherAsian Institute of Technology
Series StatementThesis ; no. GT-93-04
AbstractThe current design practice of bored piles in residual weathered formations in Kuala Lumpur is based mainly on shear strength. The settlement considerations are not given due attention at this design stage even though the acceptance criteria of single piles during pile load tests is based on the permissible settlement values as stipulated in specifications/codes. In this study, a reliable method of predicting the complete load settlement and load distribution curves is proposed for bored piles in a residual weathered formation (Kenny Hill Formation : meta-sedimentary) based on the: 1. Careful considerations of the weathering profiles and the engineering characteristics of this formation. 2. Field performance data on full scale instrumented bored pile load tests. 3. Load transfer characteristics design of the load deformation behavior. In this deformation analysis, the pile installation method and the non-linear behavior of the pile material are also incorporated. A rational design procedure is proposed for bored piles in this formation considering both the serviceability state (settlement) and the ultimate state (stability against shear failure). Further, the elastic methods can be used to predict the pile group settlement at design loads. Simple correlations are obtained to estimate the elastic modulus of this formation.
Year1994
Corresponding Series Added EntryAsian Institute of Technology. Thesis ; no. GT-93-04
TypeThesis
SchoolSchool of Civil Engineering
DepartmentOther Field of Studies (No Department)
Academic Program/FoSGeotechnical and Transportation Engineering (GT)
Chairperson(s)Balasubramaniam, A.S. ;Noppadol Phien-wej;
Examination Committee(s)Bergado, Dennes T. ;Seah, Tian Ho
Scholarship Donor(s)The Government of Japan ;
DegreeThesis (M.Eng.) - Asian Institute of Technology, 199


Usage Metrics
View Detail0
Read PDF0
Download PDF0