| Author | Chatchawan Temridtiwong |
| Call Number | AIT Thesis no.IE-93-22 |
| Subject(s) | Quality control
|
| Note | A thesis submitted in partial fulfillment of the requirement for the degree of Master of Engineering, School of Engineering and Technology |
| Publisher | Asian Institute of Technology |
| Series Statement | Thesis ; no. IE-93-22 |
| Abstract | The transformation of materials into a finished product normally uses several production stages. The common practice is to inspect the incoming lots first for some quality conformance and then to perform production operation on that lot. Output from each production station before going to the next stage must be inspected again. Because of the reliable factor, this study is issued the rectifying inspection policy for the incoming raw-materials and screening inspection policy for the units during production process. A goal is to determine the inspection policy for the units so as to optimize global objective that is appraisal costs minimization. This study is separated work into 2 models. Single line multi-stage series system is contemplated in the model I. A pattern search technique is used to calculate the optimal policy with the specify Average Outgoing Quality Lirnit(AOQL). Computer program is written for reckoning this model function. Model II is two series line production with commonality. This model observes the effect of commonality on the optimal inspection policy. |
| Year | 1993 |
| Corresponding Series Added Entry | Asian Institute of Technology. Thesis ; no. IE-93-22 |
| Type | Thesis |
| School | School of Engineering and Technology (SET) |
| Department | Department of Industrial Systems Engineering (DISE) |
| Academic Program/FoS | Industrial Engineering (IE) |
| Chairperson(s) | Nagarur, Nagen N.; |
| Examination Committee(s) | Fujiwara, Okitsugu ;Huynh Ngoc Phien; |
| Scholarship Donor(s) | Government of Japan; |
| Degree | Thesis (M.Eng.) - Asian Institute of Technology |