1 AIT Asian Institute of Technology

Slope stability and stabilization method of a 100-m vertical cut in a limestone bluff

AuthorThakur, Krityanand
Call NumberAIT Thesis no.GT-91-12
Subject(s)Slopes (Soil mechanics)

NoteA thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology
PublisherAsian Institute of Technology
Series StatementThesis ; no. GT-91-12
AbstractStability and stabilization methods required for 125m high vertical cut in the northern face of the Khao Chee.Chan, an abandoned limestone quarry, situated in Sattahip district, Thailand to facilitate carving of a 109m high Lord Buddha's image have been studied. Geolog'ical mapping was done in the field on the slope face and mechanical strengi:h properties of the rock samples collected from the site were determined in the laboratory. Based on the geological mapping, surface roug·hness measured in field and direct shear test under low normal stress on saw-cut and intact specimens, uniaxial compressive strength, point load index, Brazilian tensile strength performed in laboratory stability analysis of the required vertical slope has been conducted. The vertical slope required has been derived from the model prepared by the department of Fine Arts, Thailand. Analytical method given by HOEK & BRAY, (1981) using· limit equilibrium approach of stability analysis has been used. Based on the above mentioned analysis, the proposed cut found to be unstable by itself resulting in a need of suitable orientation of cut, external support and special blasting technique. Grouted cable anchors and excavation using presplit blasting with buffer blast holes seemed to be suitable for the long· term stability of the slope.
Year1991
Corresponding Series Added EntryAsian Institute of Technology. Thesis ; no. GT-91-12
TypeThesis
SchoolSchool of Engineering and Technology (SET)
DepartmentDepartment of Civil and Infrastucture Engineering (DCIE)
Academic Program/FoSGeotechnical and Transportation Engineering (GT)
Chairperson(s)Noppadol Phien-wej;
Examination Committee(s)Prinya Nutalaya;Balasubramaniam, A. S.;
Scholarship Donor(s)DAAD;
DegreeThesis (M.Eng.) - Asian Institute of Technology


Usage Metrics
View Detail0
Read PDF0
Download PDF0