Line description for mechanical engineering drawings | |
| Author | Taweesak Kijkanjanarat |
| Call Number | AIT Thesis no. CS-91-37 |
| Subject(s) | Pattern recognition systems Engineering drawings |
| Note | A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology |
| Publisher | Asian Institute of Technology |
| Abstract | A prototype of the line description system have been developed. The major goal of the system is to construct explicit, meaningful description of lines for mechanical engineering drawings. The input of the system is the vectorized form of line segments obtained from scanning the image and applying the contour tracing and line extraction algorithms. During processing, features of line segments are extracted and compared with fundamental features of line conventions recommended by ASA standard to decide what kinds of line segments they should be. The result is displayed on the color terminal by using the different color to show the different kinds of lines. Additionally, the system converts the output description to the ASCII format file which can be converted into a suitable CAD format for further use. |
| Year | 1991 |
| Type | Thesis |
| School | School of Engineering and Technology (SET) |
| Department | Other Field of Studies (No Department) |
| Academic Program/FoS | Computer Science (CS) |
| Chairperson(s) | Zhao, Ming |
| Examination Committee(s) | Surapong Auwatanamongkol ;Bohez, Erik L. J. |
| Scholarship Donor(s) | The Government of Australia |
| Degree | Thesis (M.Eng.) - Asian Institute of Technology, 1991 |