1
Performance evaluation of an enamel coated mouldboard plough | |
Author | Suharno |
Call Number | AIT Thesis no. AE-89-14 |
Subject(s) | Plows |
Note | A thesis submitted in partial fulfilment of the requirements for the degree of Master of Engineering, School of Environment, Resources and Development |
Publisher | Asian Institute of Technology |
Abstract | Experiments were conducted in a stubbled paddy field to determine the effect of enamel coating on specific draft of mouldboard plough. An enamel coated plate of mouldboard shape was fabricated and the performance of a mouldboard plough with and without this plate was evaluated. Experiments were conducted at 24.1%, 28.4% and 32.8% (d.b.) soil moisture content. To study the effect of ploughing speed and depth, speed was varied from 3 . 7 kmph to 5.8 kmph and the ploughing depth was varied from 18 cm to 25 cm. It was observed that at all moisture contents the enamel coating reduced the specific draft required to pull the mouldboard compared to plough without enamel plate on the mouldboard. The overall per cent reduction in the specific draft was in the range of 8 to 23% . At all moisture contents the specific draft required for enamel coated and ·uncoated mouldboard plough increased with an increase in the speed. However the increase in specific draft for uncoated mouldboard plough was taper than Urn enamel coated plough during almost all tests. Increase in moisture content showed decrease in t e specific draft for both the ploughs. The enamel coated plough gave the best reduction of 2 3 % in specific draft at 25 cm ploughing depth, 5.8 kmph speed and 32.8% soil moisture content. |
Year | 1989 |
Type | Thesis |
School | School of Environment, Resources, and Development |
Department | Department of Food, Agriculture and Natural Resources (Former title: Department of Food Agriculture, and BioResources (DFAB)) |
Academic Program/FoS | Agricultural and Food Engineering (AE) |
Chairperson(s) | Salokhe, Vilas M. ;Gee-Clough, D. ; |
Examination Committee(s) | Singh, Gajendra ;Gupta, Chandra P. ; |
Scholarship Donor(s) | US- ASEAN; |
Degree | Thesis (M.Eng.) - Asian Institute of Technology, 1989 |