1
A study on shear strength of bolt anchorage | |
Author | Kai, Ling |
Call Number | AIT Thesis no.ST-88-14 |
Subject(s) | Anchorage (Structural engineering) |
Note | A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Engineering and Technology |
Publisher | Asian Institute of Technology |
Abstract | This study reports the results of an experimental investigation of anchor bolts embedded in unreinforced concrete, monotonically loaded in shear. All anchor bolts were embedded sufficiently to develop the minimum tensile strength of the bolt steel. Pairs of anchor bolts with varing spacings and edge distances were loaded in shear in the direction perpendicular to the line of bolts to observe the failure interaction mechanisms of two bolts. Tests were also conducted on single bolt anchorages with varing edge distances to compare with reults of double bolts. Load-deflection curves up to three cycles of unloading and reloading prior to reaching the ultimate loads, are obtained for all the tests. |
Year | 1988 |
Type | Thesis |
School | School of Engineering and Technology (SET) |
Department | Other Field of Studies (No Department) |
Academic Program/FoS | Structural Engineering (STE) /Former Name = Structural Engineering and Construction (ST) |
Chairperson(s) | Sritawat Kitipornchai ;Ueda, Tamon |
Examination Committee(s) | Pichai Nimityongskul |
Scholarship Donor(s) | Government of the Republic of China |
Degree | Thesis (M.Eng.) - Asian Institute of Technology, 1988 |