| Author | Viboon Thepent |
| Call Number | AIT Thesis no.AE-85-19 |
| Subject(s) | Corn--Drying
|
| Note | A thesis submitted in partial fulfillment of the requirements for the degree of Master of Engineering, School of Environment, Resources and Development |
| Publisher | Asian Institute of Technology |
| Abstract | Two models were developed to simulate the drying of corn in cylindrical bin with radial air flow. The first model was semi-empirical in nature whilst the second employed the near equilibrium simulation approach. This study was considered the prediction of grain moisture and temperature changes at any point in a bin and at any time when drying was being carried out. The inlet air conditions were changed continuously during the test periods. A system of equations for prediction these changes was presented, methods of determining the relevant physical properties were considered, and step by step solution by means of a digital computer is given. The computed results were compared with experimental observations. |
| Year | 1985 |
| Type | Thesis |
| School | School of Environment, Resources, and Development (SERD) |
| Department | Other Field of Studies (No Department) |
| Academic Program/FoS | Agricultural and Food Engineering (AE) |
| Chairperson(s) | Jindal, Vinod Kumar |
| Examination Committee(s) | Illangantileke, Sarath G. ;Gupta, Chandra P. |
| Scholarship Donor(s) | Carl Duisberg-Gesellscnaft (CDG) Federal Republic of Germany |
| Degree | Thesis (M.Eng.) - Asian Institute of Technology, 1985 |