AIT Thesis no.ST-24-28
Seismic risk evaluation of high-rise buildings by : a simplified analysis procedure
by Eaindra Myat Min
|
AIT Thesis no.ST-24-29
Development of a low-cost laser vibrometer sensor for structural indentification
by Kim, Mengchheang
|
AIT Thesis no.ST-25-01
Determining the impact of structural detailing on seismic performance of concrete buildings
by Naw Yee Mon Kyaw
|
AIT Thesis no.ST-25-02
AI-assisted predictive design for prestressed concrete I-girder bridges
by Hammad, Muhammad
|
AIT Thesis no.ST-25-03
The effect of a large podium on a tall building's seismic response subjected to far-fault ground motion
by Sok, Thearith
|
AIT Thesis no.ST-25-04
Seismic performance evaluation of a gravity-load designed RC building in Yangon, Myanmar
by Po Po Han Myint
|
AIT Thesis no.ST-25-05
AI-driven predication of concrete beam size, design and capacity for gravity loads
by Zwe Yan Naing
|
AIT Thesis no.ST-25-06
Identification of optimal seismic resistant confidurations of viscous dampers in multi-story buildings by numerical optimization
by Shin Thant Aye
|
AIT Thesis no.ST-25-07
Seismic fragility assessment of mid-rise RCF buildings with L-and C-shape irregularities : a multi-mode pushover analysis approach with varying re-entrant corner configurations
by Yon, Thearith
|
AIT Thesis no.ST-25-08
CUDA-based solver in AEM for large deformation of extra-large structures
by Phoowanun Tunnikorn
|
AIT Thesis no.ST-25-09
The effect of a large podium on a tall building's seismic response subjected to near-fault pulse-like ground motions
by Ly, Chhayleang
|
AIT Thesis no.ST-25-10
Development of a novel finite rigid body element with embodied continuum theory
by Weijie, Lim
|
AIT Thesis no.ST-25-11
A comparative study of pre-engineered buildings (PEB) and conventional steel buildings (CSB)
by Nattaporn Ponpai
|
AIT Thesis no.ST-25-12
Data-driven numerical model updating of reinforced concrete structures using artificial neural networks
by Peerawut Watsaratiyanont
|
AIT Thesis no.ST-25-13
An experimental study on the effects of various mix proportions and constituents on the mechanical and durability properties of low-carbon UHPC
by Maskey, Progress Man
|
AIT Thesis no.ST-25-14
A comparative study of precast column-foundation joints : grouted column shoes versus integrated dry shear keys
by Suthep Phosri
|
AIT Thesis no.ST-25-15
Development of accidental blast analysis module for 3D applied element method
by Aliyar, Mohamed Abzal Ilahi
|
AIT Thesis no.ST-25-16
Effects of podium in the seismic response of tall buildings
by Manandhar, Sichu
|
AIT Thesis no.ST-25-17
Development of a rapid post-earthquake functionality assessment system for tall buildings : a case study of Chiang Rai Prachanukroh hospital
by Shrestha, Saurav Kumar
|
AIT Thesis no.ST-25-18
Development of a rapid post-earthquake functionality assessment system for tall buildings : a case study of the Mae Fah Luang university hospital
by Surapol Bootsripoom
|