Browse by Call Number


AIT Thesis no.ST-23-01
In-plane behavior of reinforced masonry walls subjected to lateral forces : an analytical approach
by Klewvarin Sonthisuwan
AIT Thesis no.ST-23-02
Seismic evaluation of low-to mid-rise RC frame buildings with masonry infill walls by using modified response spectrum analysis (MRSA)
by Suriyapoom Rujichai
AIT Thesis no.ST-23-03
An accurate uncoupled modal response history analysis procedure based on nonlinear pushover response-deformation responses : high-rise building application
by Jirapat Watchawong
AIT Thesis no.ST-23-04
Investigation of bursting and spalling tension in the end zone of prestressed concrete member with geometrical discontinuity
by Nuttapong Sompong
AIT Thesis no.ST-23-05
Finite element model updating for a cable–stayed bridge based on field measured data : dynamic properties and deformation and strain responses to truck loads and thermal loads
by Kantarat Hoykaew
AIT Thesis no.ST-23-06
Development of preplaced aggregate concrete with low cement content
by Ghimire, Subarna
AIT Thesis no.ST-23-07
Statistical mixture design of eco-efficient ultra high performance concrete
by Hossain, Md. Jabed
AIT Thesis no.ST-23-08
Development of seismic fragility functions of RC low-rise single house buildings in Chiang Mai
by Herath, Herath Mudiyanselage Nimanthie Manisha
AIT Thesis no.ST-23-09
Effects of plan irregularities on seismic response of tall buildings
by Thu Rein Htun
AIT Thesis no.ST-23-10
Experiments on strain measurement in reinforced concrete structures by sampling moiré method
by Jidapa Sorn-U-Rai
AIT Thesis no.ST-23-11
Long distance displacement measurement using a sampling moiré camera in an actual field measurement condition
by Prach Kao-eian
AIT Thesis no.ST-23-12
Analysis of different casting techniques on properties of preplaced aggregate concrete
by Thanapol Rujjiradthitikan
AIT Thesis no.ST-23-13
Re-engineering short span bridges using ultra-high-performance fiber-reinforced concrete (UHPFRC)
by Panut Thamrongvisava
AIT Thesis no.ST-24-01
Modelling approaches for gravity-only framing not designated as part of the seismic force resisting system in performance-based design(PBD) of tall buildings
by Umer, Ahsan
AIT Thesis no.ST-24-02
Seismic behavior of reinforced concrete (RC) buildings on hill slopes in Nepal
by Shakya, Yogesh
AIT Thesis no.ST-24-03
Rapid indentification of seismic damage in a multi-story hospital building in Chiang Mai
by Kyawt Tin Zar Ko
AIT Thesis no.ST-24-04
Rapid indentification of seismic damage in a multi-story hospital building in Chiang Rai by using acceleration response time histories
by Koirala, Pralhadh
AIT Thesis no.ST-24-05
Effect of using concrete belt wall in flat slab-shear wall tall building in high wind and high seismic region
by Yim, Sopanha
AIT Thesis no.ST-24-06
Developing a comprehensive framework and tool for composite section analysis including long-term effects
by Patcharaphon Nimmanwattana
AIT Thesis no.ST-24-07
Experimental evaluation of retrofitting of partially damaged masonry houses using fiber reinforced coating
by Kafle, Nitisha