AIT Thesis no.ST-09-07
Development in manufacture and use of portland limestone cement
by Ritthichai Doncharee
|
AIT Thesis no.ST-09-09
Development of a hybrid precast wall system for seismic resistance
by Hadiwijaya, Irma Juwitasari
|
AIT Thesis no.ST-09-10
Seismic retrofitting of mid rise reinforced concrete frame buildings with a soft/weak first story using buckling restrained braces
by Chandra, Jimmy
|
AIT Thesis no.ST-09-11
Extraction of strut and the model from 3D solid element mesh analysis
by Dammika, Abeykoon Jalath
|
AIT Thesis no.ST-10-01
Effective modeling of shear walls in high rise buildings for nonlinear static and dynamic analysis
by Shahi, Rojit
|
AIT Thesis no.ST-10-02
Effect of building plan curvature and diaphragm modeling on lateral response of tall buildings
by Ja San Lu
|
AIT Thesis no.ST-10-03
Enhanced conductivity measurement techniques for evaluation of metakaolin pozzolanic activity
by Chhetri, Purna Bahadur
|
AIT Thesis no.ST-10-04
Effective modeling of bridge abutments for nonlinear static analysis
by Reni, Stefani
|
AIT Thesis no.ST-10-05
Implementation of new constitutive relation for shear-flexure interaction for cyclic response of squat RC walls
by Hayat, Omar
|
AIT Thesis no.ST-10-06
Flexural strengthening of reinforced concrete beams using high performance ferrocement
by Kamal, Kamaluddin
|
AIT Thesis no.ST-10-07
Utilization of metakaolin-based geopolymer as adhesive for refractory
by Atinuch Sinsilaket
|
AIT Thesis no.ST-10-08
Applicability of enhanced pushover analyses methods considering higher-mode effect for tall buildings
by Kusuma, Amelia
|
AIT Thesis no.ST-10-09
Development of microwave curing technique to predict the 28-day compressive strength of fly ash concrete
by Ghafoorzai, Abdul Habib
|
AIT Thesis no.ST-10-10
Development of precast hybrid wall-frame building systems for seismic resistance
by May Phyo Aung
|
AIT Thesis no.ST-10-11
Development of a general purpose software package for offshore platform structural analysis
by Thanh Huu Le
|
AIT Thesis no.ST-10-12
Seismic performance improvement of low to mid rise gravity load designed reinforced concrete frame buildings by buckling restrained braces and fiber reinforced polymer
by Phichaya Suwansaya
|
AIT Thesis no.ST-10-13
Performance of metakaolin concrete against carbonation and chloride penetration
by Chatree Kittisapcharoen
|
AIT Thesis no.ST-10-14
Development of magnesium phosphate cement rapid reapir mortar
by Monsan Visesgahamin
|
AIT Thesis no.ST-10-15
Seismic performance of low-to-mid rise gravity-load-designed RC buildings with configuration irregularities
by Sarun Chimamphant
|
AIT Thesis no.ST-10-16
Seismic safety evaluation of earth dams in northern Thailand
by Bhuddarak Charatpangoon
|