Browse by Call Number


AIT Thesis no.ST-07-11
Structural behavior of repaired reinforced concrete beams
by Siam Suwathanangkul
AIT Thesis no.ST-07-12
Feasibility study of using natural pozzoloans from Democratic Peoples Republic of Lao as partial replacement of cement in roller compacted
by Jadhav, Mandar
AIT Thesis no.ST-07-13
Creep and shrinkage of high strength and durable concrete containing high volume fly ash
by Samrerng Thongton
AIT Thesis no.ST-07-14
Detection of rebar corrosion by ultrasonic wave
by Anawat Chotesuwan
AIT Thesis no.ST-07-16
Effects of beam-column joint damage on inelastic seismic responses of RC frame buildings
by Sarawut Rungrattanaubon
AIT Thesis no.ST-07-6
Nonlinear modeling of gravity load designed reinforced concrete buildings for seismic performance evaluation
by Matrin Suthasit
AIT Thesis no.ST-07-9
Aerodynamic interference effects of neighbouring buildings on the characteristics of wind forces on tall buildings
by Thapana Thanatsang
AIT Thesis no.ST-08-01
Development of precast hybrid beam-column frame buildings for moderate to high seismicity regions
by Krit Laohakunvetit
AIT Thesis no.ST-08-02
Extraction of strut-and-tie models from finite element analysis using shell elements
by Rigon, Jason C.
AIT Thesis no.ST-08-03
Nonlinear dynamic analysis of gravity load designed reinforced concrete buildings with soft story for seismic performance evaluation
by Saw Marlar
AIT Thesis no.ST-08-05
Study and development of performance tests for plastering mortar
by Wichet Sittikaew
AIT Thesis no.ST-08-06
Development of lightweight aggregate concrete containing pulverized fly ash and bottom ash
by Theradej Litsomboon
AIT Thesis no.ST-08-07
Comparative parametric study on reinforced concrete column cross-section for strength and ductility
by Qaasim, Mohammad
AIT Thesis no.ST-08-08
Preliminary design investigation on the use of an offshore concrete gravity base platform in the Gulf of Thailand
by Poplarp Soongsawang
AIT Thesis no.ST-08-09
Development of a fiber modeling and analysis framework for complex composite cross-sections
by Mula, Jereme E.
AIT Thesis no.ST-09-01
Performance of modified ferrocement on corrosion
by Angelito, Remunthupillai Alex
AIT Thesis no.ST-09-03
Optimization for mixture proportioning of tile adhesive using a statistical mixture design
by Jeerapat Techakunchaiyanunt
AIT Thesis no.ST-09-04
Effects of plan-eccentric infill walls configuration on 3D nonlinear response of reinforced concrete frame buildings
by Rayamajhi, Deepak
AIT Thesis no.ST-09-05
Shaking table test and numerical simulation of a concrete gravity dam
by Sumetee Charoenwongmit
AIT Thesis no.ST-09-06
Performance of mortar containing alkali-activated metakaolin based binders
by Supit, Steve Wilben Macquarie