AIT Thesis no.ST-20-09 Seismic perfromance assessment of low-rise buildings subjected to repeated earthquakes by Giri, Suyog
|
AIT Thesis no.ST-20-10 Seismic performance assessment of a high-rise building subjected to repeated earthquakes by Rajbhandari, Merit
|
AIT Thesis no.ST-20-11 Reinforced concrete beam-column joint simulation under reversed cyclic loads using layered-shell elements In SAP2000 by Sthapit, Ronit
|
AIT Thesis no.ST-20-12 Enhancing the seismic performance of tall buildings with outrigger systems using viscoelastic coupling dampers by Krishnakumar, Thanirosan
|
AIT Thesis no.ST-20-13 Evaluation of nonlinear seismic response of mid-rise buildings with RC walls and infill walls by using a modified response spectrum analysis (MRSA) method by Pradhananga, Anuj
|
AIT Thesis no.ST-20-14 Evaluation of nonlinear seismic responses of low- to mid-rise RC frame buildings with masonry infill walls by using a modified response spectrum analysis (MRSA) method by Bhattarai, Kapil
|
AIT Thesis no.ST-20-15 Implication of performance-based design on resilience and cost of a tall building in the Philippines by Gautam, Angshuman
|
AIT Thesis no.ST-20-16 A comparison of accidental eccentricity due to influencing factors with code-based approach by Karunarathna, Pindeniya Appuhamilage Sarala
|
AIT Thesis no.ST-20-17 Calibration of structural models using measured building response by Sapkota, Ashish
|
AIT Thesis no.ST-20-18 Seismic performance improvement of existing highway bridges by base isolation approach by Nat Hanwiboonwat
|
AIT Thesis no.ST-20-19 Seismic performance evaluation of steel diagrid system for tall building in high wind and seismic region by Seng Sorpichkapoun
|
AIT Thesis no.ST-20-20 Evaluation of seismic damage of tall buildings from acceleration response time histories by a modal decomposition approach by Chananwath Sinthumongkhonchai
|
AIT Thesis no.ST-20-21 Evaluation of equivalent static wind forces for low-rise building from simultaneous pressure measurement data by Piyawich Tanburinthip
|
AIT Thesis no.ST-20-22 The experiments on precast beams-column sub-assemblages using u-shell and grouted tube rebar splices by Thanathip Wongsorod
|
AIT Thesis no.ST-20-23 Measurement of wind-induced dynamic stresses in large billboard structure by Naditorn Pirisomboon
|
AIT Thesis no.ST-20-24 Evaluation of mega column, tubular system and core wall system for tall buildings in low to moderate seismic region by San Thaw Tar Myint
|
AIT Thesis no.ST-20-25 Active control of wind induced responses using plasma actuators by Shrestha, Saugat
|
AIT Thesis no.ST-20-26 Experiments on tension force carrying capacity of grouted rebar splice in steel pipe confinement by Su Yee Lei
|
AIT Thesis no.ST-20-27 Development of high-strength lightweight concrete with expanded clay aggregate by Peerawat Parnporamat
|
AIT Thesis no.ST-20-28 Experimental study on the beam-column connection for precast concrete frames using confined-splice system under reversed cyclic loadings by Onprapha Uppakaew
|