AIT Thesis no.ST-18-24
Damage identification of a scaled model of RC structural walls in high-rise building using the normalized modal strain approach
by Chananyoo Maneechan
|
AIT Thesis no.ST-18-25
Full-scale health monitoring of 26-story abandoned buildings by acceleration and modal strain measurement under ambient and forced excittions in comparison with numerical analysis
by Chaiyapruek Panitchayangkul
|
AIT Thesis no.ST-18-26
Structural health monitoring of a pile cap scaled-modal by the normalized modal strain approach
by Chiraphak Suesat
|
AIT Thesis no.ST-18-27
Damage identification of a 3-continuous span reinforced concrete bridge model by normalized modal strain approach
by Sirodom Somboon
|
AIT Thesis no.ST-18-28
An experimental study of thin U-shell ferrocement precast beam-column connections
by Tanyaporn Komvijit
|
AIT Thesis no.ST-18-29
Evaluation of equivalent static forces for the analysis of along wind, across wind and torsional wind responses of tall
by Krisana Watanautamasatian
|
AIT Thesis no.ST-18-30
The experiment on precast frame system with the connection technique using tack-weld in beam to column rebars in beam-column joint under effects from gravity load
by Myat Noe Pwint
|
AIT Thesis no.ST-18-31
Experimental study of the two continuous infilled brick walls in precast concrete frame under lateral reversed cyclic load
by Yein Thwet Aein
|
AIT Thesis no.ST-18-32
Seismic base isolation of tall building with RC shear walls: A comparison between fixed-based and isolated buildings
by Yesica, Anastasia
|
AIT Thesis no.ST-18-33
The experiment on the precast frame system with spliced-weld rebar connection in beam-column joint under effects from gravity load
by Moe Pwint Phyu Aung
|
AIT Thesis no.ST-19-01
Performance based seismic evaluation of high rise R.C. core wall building in Karachi, Pakistan
by Farooqi, Anas Ahmad
|
AIT Thesis no.ST-19-02
An experimental study of a precast beam-beam connection using u-shell ferrocement without bent in splice bar ends
by Dammalapati, Kartheek
|
AIT Thesis no.ST-19-03
The development of structural health monitoring technique of external prestressing tendon for precast segmental box girders by cable vibration measurement
by Narawich Thanawongwat
|
AIT Thesis no.ST-19-04
System development of moire camera array for displacement and strain measurements
by Tuladhar, Rujika
|
AIT Thesis no.ST-19-05
Performance evaluation of sampling moire method in displacement measurement from long distance
by Winsupa Junmoogda
|
AIT Thesis no.ST-19-06
Development of mix design of structural self-compacting lightweight concrete
by Wasin Wangtan
|
AIT Thesis no.ST-19-07
Enhancing seismic resilience by nonstructural measures of tall building in Manila, Philippines
by Diaz, Catherine Borja
|
AIT Thesis no.ST-19-08
Deep neural network based approach for seismic fragility assessment of an ordinary standard bridge
by Devkota, Ajit
|
AIT Thesis no.ST-19-09
An integrated study of structural health monitoring by measurements of acceleration and strain caused by ambient effects
by Kritcha Karunkritkul
|
AIT Thesis no.ST-19-10
A response modification analysis procedure for seismic analysis of high-rise, shear-walled buildings
by Joshi, Sara
|