AIT Thesis no.ST-19-14
Seismic response comparison of independent and adjoining low-rise masonry buildings without gap
by Khan, Zeba
|
AIT Thesis no.ST-19-15
Seismic base isolation of Multi-Span Simply Supported (MSSS) concrete bridges
by Agrawal, Pratibha
|
AIT Thesis no.ST-19-16
Performance evaluation of a compression-free energy dissipation brace by dynamic testing
by Siraphop Kladam
|
AIT Thesis no.ST-19-17
The development of modal strain measurement for balanced cantilever bridges by using semi-conductor strain gauges
by Bhowmik, Sanjoy Kumar
|
AIT Thesis no.ST-19-18
Normalized modal curvature measurement for a reinforced concrete frame structure
by Opath Dumnernnirun
|
AIT Thesis no.ST-19-19
Seismic performance of adjoining and independent low-rise RC frame-infill buildings in Yangon, Myanmar
by Honey
|
AIT Thesis no.ST-19-20
Development of high-strength, self-leveling mortar for Thin-Layer repairing application
by Baruah, Pranab
|
AIT Thesis no.ST-19-21
Effects of enforcing backup frame condition on a dual system high rise structure
by Rahman, Mohammad
|
AIT Thesis no.ST-19-22
Structural health monitoring (SHM) by acceleration and modal strain measurements from traffic-induced vibrations in Bangkok-Noi canal crossing bridge using piezoresistive-based strain transducers
by Rattana Tiwari
|
AIT Thesis no.ST-19-23
Evaluation of RC mega column, tubular system and core wall system for tall building in high wind and high seismic region
by Phal Chanpisith
|
AIT Thesis no.ST-19-24
Experiments on the precast beam-column frame sub-assemblage using U-Shell connection under the simulated uniformly distributed gravity load
by Arfarn Cheali
|
AIT Thesis no.ST-19-25
Experimental investigation of high flexural strength preplaced aggregate concrete
by Dit Preedaprachyakul
|
AIT Thesis no.ST-20-01
An experiment on RC beam-column joint subassemblage of shophouse buildings in Thailand under the reversed cyclic lateral load
by Myo Chit
|
AIT Thesis no.ST-20-02
Development of preplaced lightweight aggregate concrete
by Wasuchart Chiemchit
|
AIT Thesis no.ST-20-03
Active control of aerodynamic flow around structures by using plasma actuators
by Phasuthorn Phiwphong
|
AIT Thesis no.ST-20-04
A study of hydraulic cement and Its application in concrete mixture optimisation using particle packing models
by Mazumdar, Aaquib Rasul
|
AIT Thesis no.ST-20-05
Effect of polymer admixtures on flexural properties of preplaced aggregate concrete
by Minsar, Mohamed Aslah Mohamed
|
AIT Thesis no.ST-20-06
Modeling of flexural-dominated composite shear walls
by Ghani, Muqtadir
|
AIT Thesis no.ST-20-07
Effect of torsional sensitivity on the performance-based seismic design of tall buildings
by Thiri San
|
AIT Thesis no.ST-20-08
Seismic response assessment of block-type building contents in tall buildings
by Natthapong Nima
|