AIT Thesis no.PP-10-07
The role of sulphuric acid addition on hot chlorine dioxide bleaching of unbleached acacia kraft pulp
by Aman, Azka
|
AIT Thesis no.PP-10-08
Effect of chip thickness on kraft cooking and bleachability of acacia crassicarpa
by Dalimunthe, Radar Herri
|
AIT Thesis no.PP-10-09
A comparison study on three fast growing hardwood kraft pulps as material in uncoated fine paper
by Xu, Wenxia
|
AIT Thesis no.PP-10-10
Developing water resistant paper with poly (E-caprolactone) and soy protein isolated
by Nattinee Bumbudsanpharoke
|
AIT Thesis no.PP-11-01
Development of low basis weight base paper for medium weight coated paper
by Patwary, Md. Amirul Islam
|
AIT Thesis no.PP-11-02
Possibilities for partial replacement of wood fiber in kraft liner with non-wood
by Bunyarat Phiphatsirikajorn
|
AIT Thesis no.PP-11-05
Optimization of black liquor solid from fiberline into chemical recovery process to reach fuel potentiality of black liquor as renewable energy in pulp mill
by Riseta, Yuniar
|
AIT Thesis no.PP-11-06
Optimizing filler retention of mixed tropical hardwood based uncoated fine paper
by Wahyudi, Ferdian Alam
|
AIT Thesis no.PP-11-07
Effects of final bleaching stage using hydrogen peroxide (Eq.) and peracetic acid in the ECF bleaching of acacia DED kraft pulps
by Ermawan, Dede
|
AIT Thesis no.PP-11-08
Effects of broke dosage on stock processing and properties of end products
by Sari, Ratna Kumala
|
AIT Thesis no.PP-12-01
The state of agglomeration of fines and fillers in papermaking furnish as a function of chemical additives, hydrodynamic shear and time
by Duangkamon Baosupee
|
AIT Thesis no.PP-12-02
Enzymatic deinking of mixed office wastepaper
by La Hien Luong
|
AIT Thesis no.PP-12-03
Low consistency refining of mixtures of softwood & hardwood bleached kraft pulp : effects of refining power
by Nugroho, Dimas Dwi Prasetyo
|
AIT Thesis no.PP-12-04
Kaolin flocculation by cationic tapioca starch with different charge densities
by Nadra, Zulfauzein
|
AIT Thesis no.PP-12-05
Low consistency refining of chemical pulp : investigating the effect of intensity on fiber cuting
by Pattira Pattarasopachai
|
AIT Thesis no.PP-12-06
Foam forming product characterizatics using wood fibers
by Rahmi, Sri Wahdini
|
AIT Thesis no.PP-12-07
Refining through enzyme
by Vu Hoai Son
|
AIT Thesis no.PP-13-01
Comparing flexural behavior of cement-bonded fiberboard reinforced bagasse, pine and coconut coir
by Hoang Van Phong
|
AIT Thesis no.PP-13-02
The potential of enzymes in ECF bleaching of Acacia pulp
by Chu Quy
|
AIT Thesis no.PP-13-03
The reaction of non-phenolic B-O-4 type lignin in alkaline media
by Pattaraporn Posoknistakul
|