AIT Thesis no.PP-08-4
Cooking and bleaching process effect on fiber development behavior of acacia mangium kraft pulp in refining
by Butar-Butar, Agunan
|
AIT Thesis no.PP-08-6
Effects of calcium carbonate dose on surface properties of coated fine paper
by Han, Bing
|
AIT Thesis no.PP-08-7
Effect of using rodlike PCC in rotogravure coating
by Pasaribu, George Harison
|
AIT Thesis no.PP-08-8
Comparison of separate and mixed mechanical treatment on acacia kraft, eucalyptus kraft and aspen BCTMP pulps for fine paper
by Wang, Nianqing
|
AIT Thesis no.PP-08-9
Production of SC-A paper from lower grade waste paper
by Giana, Inda
|
AIT Thesis no.PP-09-01
Effects of latexes properties and binder type on coated paper properties
by Kumar, Pramod
|
AIT Thesis no.PP-09-02
A model to maximize the bending stiffness of two-ply paper or boards
by Chen, Zhijian
|
AIT Thesis no.PP-09-03
Effect of cooking kappa number on oxygen delignification and properties of bleached acacia pulp
by Napitupulu, Eka Hisar
|
AIT Thesis no.PP-09-04
Mixed acacia kraft pulping using a mixture of pin chips and mill standard chips
by Affan, Ibnu
|
AIT Thesis no.PP-09-05
Effect of ClO2 and H2O2 on the characteristics of bleached Acacia pulp
by Hariansyah, Budi
|
AIT Thesis no.PP-09-07
Eucalyptus CTMP and high yield kraft pulp in linerboard
by Tipnipa Cheerararuensak
|
AIT Thesis no.PP-09-08
Chemical additives and surfactants on kraft pulping of E. camaldulensis
by Hasan, Md. Jabed
|
AIT Thesis no.PP-09-09
Development of a data acquisition system for PPT Escher Wyss refiner
by Audhie, Ronald
|
AIT Thesis no.PP-09-10
Effect of bio-polymer latex on properties of coated paper
by Srikanth, N.
|
AIT Thesis no.PP-10-01
Effect of paper broke and filtrate water on paper properties
by Damrongjet Santijameroenkit
|
AIT Thesis no.PP-10-02
Bleaching comparison on acacia kraft pulp produced from continuous and batch cooking system
by Lasmaretty, Itsna Lathifah
|
AIT Thesis no.PP-10-03
Evaluation of oxygen delignification process on removing lipophilic extractive of acacia mangium and Acacia crassicarpa
by Sanyoto, Ari Aji
|
AIT Thesis no.PP-10-04
Effects of process, wet and variables on Alum - Cationic Rosin sizing & comparison with PAC - Cationic Rosin and AKD sizing
by Ma Tien Chuong
|
AIT Thesis no.PP-10-05
Non-chemical recycling of MOW by fractionation
by Tunchira Bunyaphiphat
|
AIT Thesis no.PP-10-06
The role of OCC long fiber fractionation on testliner strength
by Luong Chi Hieu
|