AIT Thesis no.PP-03-1
Paper and board dye phenomena using virgin and recycled fibers
by Chaiyaratana Archavaratana
|
AIT Thesis no.PP-03-10
Effect of modified tapioca starch on coating color properties and woodfree paper properties
by Daoruang Inthong
|
AIT Thesis no.PP-03-2
Refining effect on formation and paper properties
by Amelia Yuniar
|
AIT Thesis no.PP-03-3
Comparison of two fiber lines using continuous and super-batch cooking system
by Yang, Jian
|
AIT Thesis no.PP-03-4
Use of aspen BCTMP to replace Eucalyptus chemical pulp in fine paper furnish
by Rahman, Md. Matiur
|
AIT Thesis no.PP-03-5
Chinese non-wood pulps and potential of wheat straw pulp for making high quality paper
by Fan, Li
|
AIT Thesis no.PP-03-6
Characterization and removal of resin from mixed tropical hardwood pulp
by Han, Ying
|
AIT Thesis no.PP-03-7
Effect of chip thickness on kraft cooking bleach ability of Acacia mangium and Eucalyptus camaldulensis
by Nampak, Honey
|
AIT Thesis no.PP-03-8
Potential of xylanase enzymes for boosting the ECF bleaching of several hardwood pulps
by Darono Wikanaji
|
AIT Thesis no.PP-03-9
Influence of cooking conditions and wood species on the formation of Hexeneuronic acids in kraft cooking
by Sah, Jainath Prasad
|
AIT Thesis no.PP-04-01
Adsorption of cationic starch on Eucalyptus pulp fibers in closed water systems
by Zhang, Hongmin
|
AIT Thesis no.PP-04-02
Comparison of performance of anionic trash catchers on particular anionic trash
by Gong, Guoping
|
AIT Thesis no.PP-04-03
Effect of cooking conditions on pulp properties of Acacia auriculiformis, Acacia mangium and 4 and 6 years old acacia hybrid
by Nguyen Van Truc
|
AIT Thesis no.PP-04-04
Effect of cooking conditions on bulk and other properties of paper based on Acacia kraft pulp
by Johannes P. Lingga
|
AIT Thesis no.PP-04-05
Comparison of Birch, Eucalyptus and Acacia pulps for offset printing
by Andy Wibowo Alias Alan Soeparjan
|
AIT Thesis no.PP-04-06
Suitability of high yield bamboo pulp for linearboard
by Tran Xuan Nam
|
AIT Thesis no.PP-04-07
Factors affecting the bleachability of Eucalyptus camaldulensis kraft pulp
by Zhao, Huaping
|
AIT Thesis no.PP-04-08
Possibilities to enhance the compression strength of testliner by improving board structure
by Saeed, Abrar
|
AIT Thesis no.PP-04-09
The effects of CTMP and SGW fines addition on paper properties of bleached mixed tropical hardwood and Eucalyptus kraft pulp
by Kurniawan Subiyantoro Rahardjo
|
AIT Thesis no.PP-04-10
Measures to control dimensional stability of fine paper
by Kumar, Satish
|