AIT Thesis no.PP-00-4
The effect of cooking alkali concentration profile on pulp and paper properties of Eucalyptus Camaldulensis
by Sann Hlaing
|
AIT Thesis no.PP-00-5
High kappa eucalyptus pulp in two stage oxygen delignification for higher yield
by Janetud Chawengsrethakul
|
AIT Thesis no.PP-00-6
Comparison of Eucalyptus urophylla, eucalyptus camaldulensis and acacias from Vietnam as fibre raw material for paper
by Nguyen Hong Minh
|
AIT Thesis no.PP-00-7
An assessment of Co bang grass for good quality pulp and paper in Vietnam
by Hoang Thanh Bac
|
AIT Thesis no.PP-00-8
ECF bleaching of tropical hardwood kraft pulp with pressurized peroxide (PO) stage
by Karim, Md. Rezaul
|
AIT Thesis no.PP-00-9
Effect of furnish variables and storage conditions on AKD sizing stability
by Pawilai Phopunyasak
|
AIT Thesis no.PP-01-1
Suitability of Acacia pulp for fine papers
by Christine Widjaya
|
AIT Thesis no.PP-01-2
The effect of aging on deinking potential of old newspaper
by Nguyen Thanh Tam
|
AIT Thesis no.PP-01-4
Using additives for the removal of extractives in kraft pulping and bleaching of hardwood
by Xu, Chenglong
|
AIT Thesis no.PP-01-5
Hydrogen peroxide bleaching in a recycled pulp and paper mill : a case study in Thailand
by Tahira, Safina
|
AIT Thesis no.PP-01-6
The fractionation potential of upgrading OCC pulp
by Sarin Sodtivarakul
|
AIT Thesis no.PP-02-1
Runnability of acacia based fine paper
by Amelia, Yenny
|
AIT Thesis no.PP-02-2
Drainability and retention properties of acacia based fine paper
by Wen, Xiangfeng
|
AIT Thesis no.PP-02-3
A comparision of energy balances in pulp mills using different raw materials
by Adhikari, Yuba Raj
|
AIT Thesis no.PP-02-4
The cost structure and the future prospects of a Chinese rice straw pulp mill
by Heikura, Hannu
|
AIT Thesis no.PP-02-5
Influence of anionic trash on retention and sizing
by Zhang, Yumiao
|
AIT Thesis no.PP-02-6
Quality of LOCC compared with EOCC and measures to improve its papermaking potential
by Feng, Minrao
|
AIT Thesis no.PP-02-7
Deinkability and paper making potential of local raw material
by Ji, Yun
|
AIT Thesis no.PP-02-8
Basis weight reduction of newsprint
by Yos Tungkaserawong
|
AIT Thesis no.PP-02-9
Suitability of Acacia pulp for woodfree coating basepapers
by Liu, Fuping
|