Browse by Call Number


AIT Thesis no.ISE-10-38
Development of a simulation-based system to support short-term operation planning in job shop
by Ploypailin Piromsopa
AIT Thesis no.ISE-10-39
Dynamic obstacle avoidance for intelligent vehicle using 3D LIDAR scan
by Parkpoom Kerdtanamongkol
AIT Thesis no.ISE-10-40
Balancing control of a bicycle robot by centrifugal force
by Pranartpol Pongpaew
AIT Thesis no.ISE-10-41
Swing up and balance control of a dual-inverted pendulum
by Sorawuth Vatanashevanopakorn
AIT Thesis no.ISE-10-43
A pan-tilt head positioning system for thermal and CCD dual sensors
by Thanit Hanpongsachitt
AIT Thesis no.ISE-10-44
Simulation model for reducing spring constant (Kv) in HDD suspension after the forming process
by Sanga Kongkaew
AIT Thesis no.ISE-10-45
Road profile estimation using road edge detection of left-right cameras
by Alisa Kunapinun
AIT Thesis no.ISE-10-48
Controller and resonance compensator optimization for head positioning system in HDD
by Boworn Panyavoravaj
AIT Thesis no.ISE-10-49
Robust inspection and ROI adaptation algorithm for NDT swage torque test process
by Nara Srieiang
AIT Thesis no.ISE-11-01
Diffferential evolution algorithm for the multicommodity distribution network design problem
by Chayakarn Bamrungbutr
AIT Thesis no.ISE-11-02
Design and development of an automatic mechanism for a low pressure waterjet-based rapid prototyping system.
by Chowdhary, Abhishek
AIT Thesis no.ISE-11-03
Wind turbine blade shape & size optimization : a case study
by Lehri, Liaquat Ali
AIT Thesis no.ISE-11-04
Multi product supply chain network design model
by Normasari, Nur Mayke Eka
AIT Thesis no.ISE-11-04
Livelihoods and changes in newly declared Ban-e-Amir National Park, Bamiyan Province, Afghaistan
by Mohibbi, Abdul Aziz
AIT Thesis no.ISE-11-05
Coordinated production - inventory decision in a multi-stage supply chain : the case of integer-powers-of-two multipliers mechanism
by Kanokwan Singha
AIT Thesis no.ISE-11-06
Coordinated production - inventory decision in a multi-stage supply chain : the case of integer multipliers mechanism with low production rate
by Buraya Srisomsak
AIT Thesis no.ISE-11-07
Applying image processing for automatic alignment in multi-color screen printing
by Wicaksono, Martinus Bagus
AIT Thesis no.ISE-11-08
Balancing control of a unicycle
by Surachat Chantarachit
AIT Thesis no.ISE-11-09
System identification of a spark ignition engine for natural gas injection rate control
by Suradech Doungpummet
AIT Thesis no.ISE-11-10
Design and simulation of MEMS inertial gyroscope
by Suthin Khankhua